Aruba 370 Series Access Point

  • 2 Gbps of maximum throughput
  • WPA3 and Enhanced Open security
  • AP type: Outdoor hardened, dual radio, 5 GHz 802.11ac
    4×4 MIMO and 2.4 GHz 802.11n 2×2 MIMO
  • Available channels: Dependent on configured
    regulatory domain
  • Transmit power: Configurable in increments of 0.5 dBm
  • Maximum (conducted) transmit power (limited by local
    regulatory requirements): -2.4 GHz band: +25 dBm per chain,
    +28dBm aggregate (2×2)
  • WARRANTY: Limited lifetime warranty

Description

Aruba 370 Series Access Point

High-performance for outdoor environments

With a maximum aggregate data rate of over 2 Gbps, the Wi-Fi 370 Series comes with MU-MIMO, four spatial streams, and optional 160MHz to add performance and capacity.

Dynamic Segmentation

Automatically enforces real-time, device-level access policies on Aruba wired and wireless networks for improved network security and simplicity.

Intelligent app visibility and control

AppRF technology leverages deep-packet inspection to classify and block, prioritize, or limit bandwidth for 1,000s of enterprise apps or groups of apps.

Hardened, industrial design

Extends the temperature range capabilities of indoor access points for environments that lack heating and cooling. The 370 Series APs also provide sealed connector interfaces to protect against dust and moisture.

Zero-touch provisioning

Access points can be factory-shipped and zero-touch provisioned through Aruba Central or AirWave using a cloud-based service to reduce deployment time, centralize configuration, and manage inventory.

Best in-class RF management

Integrated AirMatch technology manages the 2.4GHz and 5GHz radio bands and actively optimizes the RF environment, including channel width, channel selection, and transmit power.

Specifications

Unique Benefits
  • Dual Radio 802.11ac access point with Multi-User MIMO
    • Supports up to 1,733 Mbps in the 5 GHz band (with 4SS/VHT80 or 2SS/VHT160 clients) and up to 300 Mbps in the 2.4 GHz band (with 2SS/HT40 clients)
  • Built-in Bluetooth Low-Energy (BLE) radio
    • Enables location-based services with BLE-enabled mobile devices receiving signals from multiple Aruba Beacons at the same time
  • Advanced Cellular Coexistence (ACC)
    • Minimizes interference from 3G/4G cellular networks, distributed antenna systems, and commercial small cell/femtocell equipment
  • Industrial design for harsh indoor and outdoor environments
    • Sealed connector interfaces to lock out dust and moisture
  • Quality of service for unified communication apps
    • Supports priority handling and policy enforcement for unified communication apps, including Microsoft Skype for Business with encrypted videoconferencing, voice, chat, and desktop sharing
  • Best-in-class RF management
    • Integrated AirMatch technology manages the 2.4-GHz and 5-GHz radio bands and actively optimizes the RF environment including channel width, channel selection and transmit power.
  • Spectrum analysis
    • Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference.
  • Wireless mesh
    • Wireless mesh connections are convenient where Ethernet drops are not available.
  • Intelligent app visibility and control
    • AppRF technology leverages deep packet inspection to classify and block, prioritize, or limit bandwidth for 1,000’s of enterprise apps or groups of apps.
  • Aruba Secure Core
    • Device assurance: Use of Trusted Platform Module (TPM) for secure storage of credentials and keys as well as secure boot.
    • Integrated wireless intrusion protection offers threat protection and mitigation and eliminates the need for separate RF sensors and security appliances.
    • IP reputation and security services identify, classify, and block malicious files, URLs, and IPs, providing comprehensive protection against advanced online threats.
    • Encrypted IPsec VPN tunnels securely connect remote users to corporate network resources.
  • AP-374
    • 5 GHz 802.11ac 4×4 MU-MIMO (1,733 Mbps max rate)
      • Four Nf connectors for external antenna operation
    • 2.4 GHz 802.11n 2×2 MIMO (300 Mbps max rate) radios
      • Two Nf connectors for external antenna operation at 2.4 GHz
  • AP-375
    • 5 GHz 802.11ac 4×4 MU-MIMO (1,733 Mbps max rate)
      • Internal Omni Antennas 4.6 dBi
    • 2.4 GHz 802.11n 2×2 MIMO (300 Mbps max rate) radios
      • Internal Omni Antennas 4.0 dBi
  • AP-377
    • 5 GHz 802.11ac 4×4 MU-MIMO (1,733 Mbps max rate)
      • Internal 80°H x 80°V Directional Antennas 6.3 dBi
    • 2.4 GHz 802.11n 2×2 MIMO (300 Mbps max rate) radios
      • Internal 80°H x 80°V Directional Antennas 6.4 dBi
Wi-Fi Radio Specifications
  • AP type: Outdoor hardened, dual radio, 5 GHz 802.11ac 4×4 MIMO and 2.4 GHz 802.11n 2×2 MIMO
  • Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)
  • 5 GHz:
    • Four spatial stream Multi User (MU) MIMO for up to 1,733 Mbps wireless data rate to up to three MU-MIMO capable client devices simultaneously
    • Four spatial stream Single User (SU) MIMO for up to 1,733 Mbps wireless data rate to individual 4×4 VHT80 or 2×2 VHT160 client devices
  • 2.4 GHz:
    • Two spatial stream Single User (SU) MIMO for up to 300 Mbps wireless data rate to individual 2×2 HT40 client devices
  • Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio
  • Supported frequency bands (country-specific restrictions apply):
    • 2.400 to 2.4835 GHz
    • 5.150 to 5.250 GHz
    • 5.250 to 5.350 GHz
    • 5.470 to 5.725 GHz
    • 5.725 to 5.850 GHz
  • Available channels: Dependent on configured regulatory domain.
  • Dynamic frequency selection (DFS) maximizes the use of available RF spectrum.
  • Supported radio technologies:
    • 802.11b: Direct-sequence spread-spectrum (DSSS)
    • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
  • Supported modulation types:
    • 802.11b: BPSK, QPSK, CCK
    • 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
  • Transmit power: Configurable in increments of 0.5 dBm
  • Maximum (conducted) transmit power (limited by local regulatory requirements):
    • 2.4 GHz band: +22 dBm per chain, +25dBm aggregate (2×2)
    • 5 GHz band: +22 dBm per chain, +28dBm aggregate (4×4)
    • Note: conducted transmit power levels exclude antenna gain.
  • Maximum EIRP (limited by local regulatory requirements):
    • 2.4 GHz band:
      • 374: 25 + Antenna Gain
      • 375: 29 dBm EIRP
      • 377: 31.4 dBm EIRP
    • 5 GHz band:
      • 374: 28 + Antenna Gain + TxBF Gain
      • 375: 35.6 dBm EIRP
      • 377: 36 dBm EIRP
  • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks.
  • Maximum ratio combining (MRC) for improved receiver performance
  • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
  • Short guard interval for 20-MHz, 40-MHz, 80-MHz and 160-MHz channels
  • Space-time block coding (STBC) for increased range and improved reception
  • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
  • Transmit beam-forming (TxBF) for increased signal reliability and range
  • Supported data rates (Mbps):
    • 802.11b: 1, 2, 5.5, 11
    • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
    • 802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15)
    • 802.11n (5GHz): 6.5 to 600 (MCS0 to MCS31)
    • 802.11ac: 6.5 to 1,733 (MCS0 to MCS9, NSS = 1 to 4 for VHT20/40/80, NSS = 1 to 2 for VHT160)
  • 802.11n high-throughput (HT) support: HT 20/40
  • 802.11ac very high throughput (VHT) support: VHT 20/40/80/160
  • 802.11n/ac packet aggregation: A-MPDU, A-MSDU

Security

  • Integrated wireless intrusion protection offers threat protection and mitigation, and eliminates the need for separate RF sensors and security appliances
  • IP reputation and security services identify, classify, and block malicious files, URLs and IPs, providing comprehensive protection against advanced online threats
  • Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys

Networking on a budget

With the integrated BLE and supporting 802.3af power, the Series APs enable enterprises to improve their work efficiency and productivity with the lowest TCO. When Ethernet drops are not available, VPN tunnels extend remote locations to corporate resources and wireless mesh connections.

Highly secure and reliable performance

The Series APs offer improved network simplicity and security in several ways. Dynamic Segmentation automatically enforces real-time, device-level access policies on Aruba wired and wireless networks. Additionally, Aruba AppRF technology leverages deep- packet inspection to classify and block, prioritize, or limit bandwidth for over 2,500 enterprise apps or groups of apps.

Flexible management options

Available management solutions include Aruba Central (available in cloud-managed and on-premises options), as well as Aruba AirWave, which supports multi-vendor networks. APs can be deployed with zero-touch provisioning to reduce deployment time, centralize configuration, and simplify inventory management.

 

Aruba Access Point

Aruba Indoor Access Point

Aruba 303 Series Access Point

Aruba 340 Series Access Point

Aruba 500 Series Access Point

Aruba 510 Series Access Point

Aruba 530 Series Access Point

Aruba 550 Series Access Point

Aruba 610 Series Access Point

Aruba 630 Series Access Point

Aruba 650 Series Access Point

Aruba Outdoor Access Point

Aruba 318 Series Access Point

Aruba 360 Series Access Point

Aruba EX370 Series Access Point

Aruba 370 Series Access Point

Aruba 387 Series Access Point

Aruba 518 Series Access Point

Aruba 560 Series Access Point

Aruba EX560 Series Access Point

Aruba 570 Series Access Point

Aruba EX570 Series Access Point

Aruba 580 Series Access Point

Aruba Ex580 Series Access Point

Aruba Remote Access Point

Aruba 203R Series Access Point

Aruba 303H Series Access Point

Aruba 500H Series Access Point

Buy Aruba Access Point online from Firewall Firm’s IT Monteur Store

Sales Number : +91 95 8290 7788
Support Number : +91 94 8585 7788
Sales Email : sales@itmonteur.net
Support Email : support@itmonteur.net

Register & Request Quote
Submit Support Ticket