Description

Aruba 387 Series Access Point

Overview:

The Aruba 387 access points are a cost-effective, simple to deploy and high performing point-to-point solution that is built upon Aruba’s hardened outdoor portfolio.

Weather-proof and temperature hardened, the Aruba AP-387 withstands the harshest outdoor environments.

With a maximum concurrent data rate of 2.5 Gbps in the 60GHz band and 867 Mbps in the 5GHz band, the AP-387 delivers an aggregate peak on air data rate of 3.37 Gbps.

The AP-387 is perfect for quickly and reliably connecting remote buildings, overcoming right of way issues or installing failover links in the event of line cuts or crushed conduit pipes. Also for improved network simplicity and security, Dynamic Segmentation automatically enforces real-time device-level access policies on Aruba wired and wireless networks.

Specifications:

WI-FI RADIO SPECIFICATIONS

AP type: Outdoor hardened, dual radio, 60GHz 11ad and 5GHz 802.11ac 2×2 MIMO 60 GHz 802.11ad 1×1 (2502.5 Mbps max rate) radio 1 Spatial Stream for up to 2.5 Gbps Internal scanning antenna +/- 45° Azimuth Scan +/- 17° Vertical Scan 5GHz 802.11ac 2×2 MU-MIMO (867 Mbps max rate) Two spatial stream MIMO for up to 867 Mbps wireless data Internal directional antenna 9 dBi Software-configurable dual radio supports 5 GHz (Radio 0) and 60GHz (Radio 1) Supported frequency bands (country-specific restrictions apply): 2.400 to 2.4835 GHz (BLE) 5.150 to 5.250 GHz 5.250 to 5.350 GHz 5.470 to 5.725 GHz 5.725 to 5.850 GHz 5.825 to 5.875 GHz 57 to 64 GHz Available channels: Dependent on configured regulatory domain. Dynamic frequency selection (DFS) maximizes the use of available 5GHz RF spectrum. Supported radio technologies: 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ad: Single carrier (SC) Supported modulation types: 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM 802.11ad: BPSK, QPSK Transmit power: Configurable in increments of 0.5 dBm for 5 GHz Maximum EIRP (limited by local regulatory requirements): 60GHz band: 40 dBm EIRP max 5GHz band: 387: 34 dBm EIRP Maximum ratio combining (MRC) for improved receiver performance on 5 GHz. Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance. Short guard interval for 20MHz, 40MHz, 80MHz on 5GHz. Low-density parity check (LDPC) for high-efficiency error correction and increased throughput. 802.11ac Transmit beam-forming (TxBF) for increased signal reliability and range 802.11ad Beam Steering Supported 11a/ac data rates (Mbps): 802.11a 6, 9, 12, 18, 24, 36, 48, 54 802.11n (5GHz): 6.5 to 600 (MCS0 to MCS15) 802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80) 802.11n high-throughput (HT) support: HT 20/40 802.11ac very high throughput (VHT) support: VHT 20/40/80/160 802.11ad 802.11n/ac packet aggregation: A-MPDU, A-MSDU

POWER
Worst-case power consumption: 13.5 W Idle power consumption: 4.5W Power sources sold separately Power over Ethernet (PoE+): 802.3at-compliant Power over Ethernet (PoE): 802.3af with some operational restriction. Max conducted power per chain for 5GHz drops to 19 dBm

OTHER INTERFACES
One 10/100/1000BASE-T Ethernet network interfaces (RJ-45) Auto-sensing link speed and MDI/MDX 802.3az Energy Efficient Ethernet (EEE) Bluetooth Low Energy (BLE) radio Up to 4dBm transmit power (class 2) and -91 dBm receive sensitivity Visual indicator (multi-color LED): For system and radio status Reset button: Factory reset (during device power up) Micro USB console interface

Security

• Integrated wireless intrusion protection offers threat protection and mitigation, and eliminates the need for separate RF sensors and security appliances
• IP reputation and security services identify, classify, and block malicious files, URLs and IPs, providing comprehensive protection against advanced online threats
• Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys

Networking on a budget