Buy Online Aruba EX560 Series Access Point With Wireless

Aruba EX560 Series Access Point

Hardware Variants
AP-565
– Built-in Omni Directional Antennas
5 GHz Antennas 5.4 dBi

Power sources sold separately

Power over Ethernet (PoE+): 802.3at-compliant

AP type: Outdoor Hardened, Wi-Fi 6 dual radio, 5 GHz 2×2
MIMO and 2.4 GHz 2×2 MIMO

Low-density parity check (LDPC) for high-efficiency error
correction and increased throughput

Maximum (worst-case) power consumption: 15.6W
Maximum (worst case) power consumption in idle mode:4.2W

Storage and transportation:
Temperature: -40° C to +70° C (-40° F to +158° F)

WARRANTY: Limited lifetime warranty

Description

Aruba EX560 Series Access Point

Groundbreaking Wi-Fi 6 capabilities

Supports wired and wireless connectivity, in a single device, for up to 1.5 Gbps wireless throughput and 256 associated clients per radio.

1.5 Gbps maximum speed (HE80/HE20)

Delivers higher speed and reliability for hazardous locations like oil and gas and potentially explosive environments.

Wi-Fi 6 for OFDMA and WPA3

Handles multiple clients regardless of device or traffic type, plus WPA3 and Advanced Open increases enterprise security.

IoT-ready Bluetooth 5 and 802.15.4/Zigbee support

Simplifies deploying and managing IoT location services, asset-tracking services, security solutions, and IoT sensors.

Dynamic Segmentation and policy-enforcement firewalls

Enforces (automatically) consistent policies across all networks, keeping users and devices secure.

AI-powered, Wi-Fi radio frequency RF with AirMatch

Utilizes AI learning, Air Match provides automated RF optimization and looks at analytics across the entire network.

Air Slice for SLA-grade performance

Guarantees a predictable user experience, prioritizing traffic and arrival of time-sensitive data with Air Slice application.

Specifications

Hardware Variants
AP-565EX Built-in Omni Directional Antennas 5 GHz Antennas 5.4 dBi 2.4 GHz Antennas 3.2 dBi BLE/802.15.4 Antennas 3.3d Bi AP-567EX Built-in 90°H x 90°V Directional Antennas 5 GHz Antennas 6.8 dBi 2.4 GHz Antennas 7.1 dBi BLE/802.15.4 Antennas 3.0 dBi

Wi-Fi Radio Specifications
AP type: Outdoor Hardened, Wi-Fi 6 dual radio, 5 GHz 2×2 MIMO and 2.4 GHz 2×2 MIMO Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1) 5GHz: Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate with individual 2SS HE80 802.11ax client devices, or with two 1SS HE80 802.11ax MU-MIMO capable client devices simultaneously 2.4GHz: Two spatial stream Single User (SU) MIMO for up to 574 Mbps (287 Mbps) wireless data rate with individual 2SS HE40 (HE20) 802.11ax client devices or with two 1SS HE40 (HE20) 802.11ax MU-MIMO capable client devices simultaneously Up to 256 associated client devices per radio Up to 16 BSSIDs per radio Supported frequency bands (country-specific restrictions apply): 2.400 to 2.4835 GHz (ISM) 5.150 to 5.250 GHz (U-NII-1) 5.250 to 5.350 GHz (U-NII-2A) 5.470 to 5.725 GHz (U-NII-2C) 5.725 to 5.850 GHz (U-NII-3/ISM) 5.850 to 5.875 GHz (U-NII-4) Maximum EIRP (limited by local regulatory requirements): 2.4 GHz band: 565: 29.2 dBm EIRP 567: 33 dBm EIRP 5 GHz band: 565: 31.4 dBm EIRP 567: 32.7 dBm EIRP Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks Maximum ratio combining (MRC) for improved receiver performance Cyclic delay/shift diversity (CDD/CSD) to enable the use of multiple transmit antennas Short guard interval for 20-MHz, 40-MHz, and 80-MHz Space-time block coding (STBC) for increased range and improved reception Low-density parity check (LDPC) for high-efficiency error correction and increased throughput Transmit beam-forming (TxBF) for increased signal reliability and range

Wi-Fi Radio Specifications

AP type:
- Outdoor Hardened, Wi-Fi 6 dual radio, 5 GHz 2×2 MIMO and 2.4 GHz 2×2 MIMO
Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)
5GHz:
- Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate with individual 2SS HE80 802.11ax client devices, or with two 1SS HE80 802.11ax MU-MIMO capable client devices simultaneously
2.4GHz:
- Two spatial stream Single User (SU) MIMO for up to 574 Mbps (287 Mbps) wireless data rate with individual 2SS HE40 (HE20) 802.11ax client devices or with two 1SS HE40 (HE20) 802.11ax MU-MIMO capable client devices simultaneously
Up to 256 associated client devices per radio
Up to 16 BSSIDs per radio
Supported frequency bands (country-specific restrictions apply):
- 2.400 to 2.4835 GHz (ISM)
- 5.150 to 5.250 GHz (U-NII-1)
- 5.250 to 5.350 GHz (U-NII-2A)
- 5.470 to 5.725 GHz (U-NII-2C)
- 5.725 to 5.850 GHz (U-NII-3/ISM)
- 5.850 to 5.875 GHz (U-NII-4)
Maximum EIRP (limited by local regulatory requirements):
- 2.4 GHz band:
  - 565: 29.2 dBm EIRP
  - 567: 33 dBm EIRP
- 5 GHz band:
  - 565: 31.4 dBm EIRP
  - 567: 32.7 dBm EIRP
Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks
Maximum ratio combining (MRC) for improved receiver performance
Cyclic delay/shift diversity (CDD/CSD) to enable the use of multiple transmit antennas
Short guard interval for 20-MHz, 40-MHz, and 80-MHz
Space-time block coding (STBC) for increased range and improved reception
Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
Transmit beam-forming (TxBF) for increased signal reliability and range

Power
Maximum (worst-case) power consumption: 15.6W Maximum (worst case) power consumption in idle mode: 4.2W Maximum (worst case) power consumption in deep-sleep mode: 1.7 Power sources sold separately Power over Ethernet (PoE+): 802.3at-compliant When powered by 1x 802.3at, there are no restrictions When powered by 1x 802.3af with IPM enabled, the AP will start up in unrestricted mode, but may dynamically apply restrictions depending on the POE budget and actual power. The feature restrictions can be programmed. When powered by 1x 802.3af with IPM disabled, the AP will lower the 2.4Ghz radio to 1×1:1

Power

Maximum (worst-case) power consumption:
- 15.6W
Maximum (worst case) power consumption in idle mode:
- 4.2W
Maximum (worst case) power consumption in deep-sleep mode:
- 1.7
Power sources sold separately
Power over Ethernet (PoE+):
- 802.3at-compliant
When powered by 1x 802.3at, there are no restrictions
When powered by 1x 802.3af with IPM enabled, the AP will start up in unrestricted mode, but may dynamically apply restrictions depending on the POE budget and actual power. The feature restrictions can be programmed.
When powered by 1x 802.3af with IPM disabled, the AP will lower the 2.4Ghz radio to 1×1:1

Security

Integrated wireless intrusion protection offers threat protection and mitigation, and eliminates the need for separate RF sensors and security appliances
IP reputation and security services identify, classify, and block malicious files, URLs and IPs, providing comprehensive protection against advanced online threats
Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys

Networking on a budget

With the integrated BLE and supporting 802.3af power, the Series APs enable enterprises to improve their work efficiency and productivity with the lowest TCO. When Ethernet drops are not available, VPN tunnels extend remote locations to corporate resources and wireless mesh connections.

Highly secure and reliable performance

The Series APs offer improved network simplicity and security in several ways. Dynamic Segmentation automatically enforces real-time, device-level access policies on Aruba wired and wireless networks. Additionally, Aruba AppRF technology leverages deep- packet inspection to classify and block, prioritize, or limit bandwidth for over 2,500 enterprise apps or groups of apps.

Flexible management options

Available management solutions include Aruba Central (available in cloud-managed and on-premises options), as well as Aruba AirWave, which supports multi-vendor networks. APs can be deployed with zero-touch provisioning to reduce deployment time, centralize configuration, and simplify inventory management.

Aruba Access Point

Aruba Indoor Access Point

Aruba 303 Series Access Point

Aruba 340 Series Access Point

Aruba 500 Series Access Point

Aruba 510 Series Access Point

Aruba 530 Series Access Point

Aruba 550 Series Access Point

Aruba 610 Series Access Point

Aruba 630 Series Access Point

Aruba 650 Series Access Point

Aruba Outdoor Access Point